BiXPower 24V 322Wh Lithium Ion Battery for E-Bike E-Scooter -BX2499B
Made with high quality Panasonic Lithium Ion cells. This battery output voltage range is 21-29.5V. Nominal output voltage 25.2V. When the battery is fully charged, its output voltage is 29.5V. The output voltage will drop gradually during the discharge process and the final cut off voltage is 21V. Note: this battery maximum output is 300W. It is recommend to use with devices that need 300W or less power. If your bicycles or scooters require more than 300W power, do not use this battery. Output Voltage: 20V 29.75V. Nominal Voltage: 25.2 V. Maximum Continuous Output Current: 13A (Output Power: 250W 300W); Maximum Burst Output Power (up to 10 minutes) Current: 15A (Output Power: 300W350W).
Water-resistant and firm ABS plastic casing. Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration. Burst Discharge Current (up to 10 minutes). 175.00 x 110.00 x 75.00 mm. (or 6.8" x 4.3" X 3).
1.86 kg (or 4.1 pound). Small Size and Light Weight. This battery only weighs around.Pounds (same capacity Lead-Acid battery will be around 16 pounds). Using a lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) batteries because of lithium-ion's high energy density, small size, and low weight.
A typical lithium-ion battery has. Of a same capacity traditional heavy bulky Sealed Lead Acid battery. The battery comes with an AC charger and output box. The AC charger can charge the battery from any 100-240V AC power source. The output box can slide into the battery contact socket.
Its output cable has 2 wires: red wire is +24V, black wire is ground. KF542B Output box: If you are using this battery for a e-bike, you may select this output box. This output box comes with a lock for mounting on a bike or other devices.Output Box (Model # KF542B). Size: 95.00 x 89.00 x 59.00 mm (3.7" x 3.5" x 2.3) The output box is lockable: if locked, it can not be removed from the battery. If unlocked, it can slide on/off the battery contact socket easily. The Four-level LED indicates current power status. Battery can be recharged either by fastening on the bike or with the provided AC adapter.
The LED (at the power button controls on/off of the battery) glows when power is on. The key lock is used to fix the battery onto the holder.
Battery can be installed easily. Simply slide the battery towards the holder by following the track. The Output Box KF542 is designed for multi-direction installation. User can change the position of battery (vertically / horizontally) by adjusting the clamp. Size: 95.00 x 89.00 x 102.00 mm.
Please note that batteries wear out with use. This item is in the category "Consumer Electronics\Multipurpose Batteries & Power\Rechargeable Batteries". The seller is "bixnet" and is located in this country: US.
This item can be shipped to United States, all countries in Europe, Japan.
- Brand: BiXPower
- Type: Rechargeable
- Amp Hours: 12.8 Ah
- Rechargeable Type: Li-Ion
- Voltage: 24V
- Model: BX2499
- MPN: BX2499B
- Battery Size: 12.8Ah @25.2V or 322 Watt-hour
- Chemical Composition: Lithium
- Battery Type: Lithium Ion
- Application: e-bike, e-Scooter, e-Wheelchair
- UPC: 816419010987