This CP190-S10 power pack comes with a 192 Watt-hour super high capacity rechargeable lithium ion battery, an AC charger, and a special DC to DC power converter for ResMed AirSense 10 CPAP machines. This battery may power ResMed. CPAP machines for 2-3 nights with the humidifier turned off. Works with the following AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed. AirStart 10 CPAP with HumidAir Heated Humidifier.
AirStart 10 Auto CPAP with HumidAir Heated Humidifier. AirSense 10 CPAP Machine with HumidAir Heated Humidifier. AirSense 10 Elite CPAP Machine with HumidAir Heated Humidifier. AirSense 10 AutoSet CPAP Machine with HumidAir Heated Humidifier.
AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier. AirCurve 10 S BiLevel Machine with HumidAir Heated Humidifier. AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.DC power converter for ResMed AirSense 10 CPAP machines. DC to DC Power Adapter can convert the battery power to 24V DC power for ResMed AirSense 10 CPAP machines. This battery only weighs 2.75 pounds. A typical Lead Acid battery with similar capacity would be around 15 pounds. Nominal Voltage: 14.8 V. 5.8" x 4.8" x 2.5 (148 x 125 x 62 mm). 2.75 lb (1.24kg). The battery pack can be charged from any 100V 240V AC power outlet with the AC charger. Please use the BiXPower authorized charger with correct settings to charge the battery only. Wrong chargers may damage the battery and can cause fire. This battery's charging voltage is 16.8V 17.1V, and the maximum charging current is 5A. The charge port connector is a 5.5x 2.5mm barrel connector with positive polarity. If you do not have correct charger for this battery, please order the battery with the optional AC charger. The battery pack comes with a output cable. One end plugs into the battery output port and the other end can plug into different connector tips. The battery output voltage range is 10V 16.8V, nominal voltage is 14.8V. When the battery is fully charged, its output voltage is 16.8V. The output voltage will decrease gradually and finally will cut off at around 10V. Most of the time, the voltage will be around 14V to 16V. Use the battery with our Special DC to DC Power Converter for ResMed AirSense 10 CPAP Machines.
With the bundled special DC to DC power converter, this battery can provide 24V DC power to ResMed AirSense 10 CPAP Machines. Special Note: The DC converter will not provide power to the CPAP machine if the battery is off.Please turn on the battery first, then connect the DC converter to CPAP Machine. Unplug the converter from the CPAP machine when not using the battery.
The item "High Capacity (192Wh) Portable Battery for ResMed AirSense 10 Machine" is in sale since Friday, April 19, 2019. This item is in the category "Health & Beauty\Health Care\Sleeping Aids\Other Sleeping Aids". The seller is "bixnet" and is located in Santa Ana, California. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Japan.